Found this on the net...
Quote:You need to hold DOWN and SELECT at the same time.
Be sure to go into the COLOR PALLETTE and set the brightness of the colors.
To SAVE your changes be sure to hit RE (recall) or it won't work.
AND
Quote:the eeprom stores all the values for the monitor, if it goes south, it will just use zero values for everything
It could be that the chip that holds the info is bad... I would check the caps on the monitor. I know this one has ALOT of them. I had another parts chasis, but the previous owner had robbed the IC's...
Hope this helps,
-Mike
